View: 389|Reply: 1

Complete gear setup for small company

[Copy link]

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
2-12-2019 02:02:55 Mobile | Show all posts |Read mode
Hi all

I am right now preparing a complete gear setup for a small production company. Until now they worked with a Canon 7D Mark I and some rented Sony PMW320. They are making primarily corporate movies, documentary and commercials. There is a budget of around 20.000 euros for cameras and lenses.

They would want two cameras in their equipment: one smaller (DSLR-like) camera for use in a run-n-gun rig, and one bigger EFP/ENG-style camera.

I have foreseen this gear:

CAMERAS

Canon 5D Mark IV
to replace the 7D Mark I
Can be used with their run-n-gun rigs they already have
Can be used in the same rig as shoulder mounted too
There are two Canon lenses available from the 7D (not the fastest ones...)

Blackmagic URSA Broadcast

In fact I want the new mini pro G2 but it isnt deliverable yet
I prefer this one above the mini 4k and mini 4.6k because of extra display (for audio monitoring)
Accessories: viewfinder, ssd recorder, vmount battery, shoulder rig, EF lens mount adapter

LENSES

Sigma 24-35 DG f/2 Art
for use with the Canon 5D
High and fixed aperture lens
Small zoom capabilities to quickly adjust framing
To make use of the automatic features of the 5D like autofocus and auto aperture

Sigma 24-35 f/2.2 Cine lens
Same as above, but for manual use (declicked aperture) and higher quality
Can be used for the 5D and the Ursa broadcast (with ef to b4 adapter)

Fujinon LA16x8BRM 4K lens
In combination with the Ursa broadcast who has a B4 lens mount.
To use the blackmagic in ENG-style or for run n gun shoots
To use blacmmagics automatic mode (autofocus, auto iris)

Offcourse there are other accessories like tripod, audio, battery, ... But Im not in a doubt for these so I only ask advice for the camera and lenses.

The biggest disadvantage of the URSA Broadcast for me is it maximum resolution, which is 3840. Other camera's (including thé 5D) are going to 4096 or higher (like the new mini pro G2). But they don't have the time to wait some more weeks (or months, or years) for Blackmagic to start selecting the new camera.

Any thoughts and advices?

Thanks
Reply

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
2-12-2019 02:02:56 Mobile | Show all posts
That's a big budget for these pages.... perhaps you should approach Pro-Dealers, to see what they suggest?
Strip out their bias for gear they have in-stock . . . However, they may be prepared to add some "extras" to get their hands on that cash.... believing there may be more in the future...
IMHO  both DSLRs and Blackmagic suffer from not being as easy to use as camcorders - This isn't an issue for Corporate  (or Cine ) shoots, where each shot takes forever to "get right" - perhaps this is already the area yr company is used to?  Changing lenses is also a nuisance and could introduce subtle colour difference . . . easy to "fix in Post" but all adds to time/cost. Even pros can faf-about getting the focus-gears to mesh properly.
On-screen resolution may be a technical issue, but for most audiences, they won't really notice... "Content is King" applies.   It's often the Set-Team that want the latest specs; to out-gun the competition, I guess.

Good luck.
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | register

Points Rules

返回顶部