View: 294|Reply: 8

Help troubleshooting build please - Boot loop

[Copy link]

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
2-12-2019 03:35:39 Mobile | Show all posts |Read mode
Just completed my build but on startup it appears to be booting then after about 30 seconds it restarts then just repeats the same process.

It’s a Asrock X570 Taichi motherboard
3900x cpu
Vengeance 32gb 3200mhz ram
5700 XT GPU


Thanks in advance
Reply

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
2-12-2019 03:35:40 Mobile | Show all posts
The motherboard should work 'as is' without a BIOS update. Try booting with one stick of RAM and swap them round if no difference. What PSU are you using? it looks as though you need a high power PSU with an 8/4pin CPU power lead, check your temps and the CPU fan is working. If needed remove and reseat the CPU,
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
 Author| 2-12-2019 03:35:41 Mobile | Show all posts
Before I try your other suggestions, when you say ‘you need a high power PSU with an 8/4pin CPU power lead’ did you mean to plug power leads from the PSU to the 8 pin socket and the 4 pin socket on the motherboard? Because I am just using the 8 pin socket. If that makes sense.
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
2-12-2019 03:35:42 Mobile | Show all posts
The motherboard should work with one or the other, but it suggests you need a fairly decent PSU 700W  as the voltage regulators are rated at 60A
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
 Author| 2-12-2019 03:35:43 Mobile | Show all posts
It’s a Corsair RM850x so should be plenty powerful enough. I’ve just added the additional 4 pin to the motherboard and tried with only 1 stick of ram and the problems still there.
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
 Author| 2-12-2019 03:35:44 Mobile | Show all posts
Oh I should have said the motherboard has a 2 digit display showing “10”. I’ve checked the manual and online and can’t find any information as to what it means.
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
2-12-2019 03:35:44 Mobile | Show all posts
Errors 1-54 relate to memory.

ASRock > FAQ

Make sure you're using the correct memory slots and clear the CMOS.
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
 Author| 2-12-2019 03:35:45 Mobile | Show all posts
Thanks Bob I’ll look into that.
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
 Author| 2-12-2019 03:35:45 Mobile | Show all posts
@Sloppy Bob & @DavidG1 you nailed it!

There is a fault with the memory. A mate kindly bought the memory out of his pc over and it worked immediately. Been running nearly 14 hours and hasn’t missed a heart beat!

Contacted Amazon who I bought it from and they said they will issue a replacement. Could be here as early as tomorrow. Happy days!

All I need now is a half decent monitor. May start another thread asking for suggestions.


Thanks again
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | register

Points Rules

返回顶部