Box Mod / Box battery advice

oska

It's just how the display is seated so the light gets through slightly, mine does also. As long as it doesn't move it should be fine.

jono987

Yeah thanks feel better now    Its so awesome coupled with a subtank mini! However all my lovely juice is too strong now at 18mlg

oska

Yeah it may feel like that. Have you fiddled around with the PWM and DC-DC mode? I thought I would use PWM mode as it is more regulated and accurate but found my usual wattage of 7.5 far too weak, even at 8 watts it wasn't the same as my MVP or Zmax at 7.5. I have now switched to DC-DC at 7.5 and it's a lovely vape.

Have a fiddle and you might find you get a happy medium without having to lower your levels. I did find 18mg too strong after about 6 months vaping, I am now at 12mg and the amount I vape it is perfect.

jono987

I'll have a play with it but even the 1.2ohm coils in the subtank need at least 12w I believe

oska

Ah, yes, forgot it was a subtank. I use between 1.5-1.7 coils in the KFL.

jono987

Hi again oska, how do you check the voltage of the battery in the sigelei? All it gives me is a rough idea with a little battery icon

oska

As far as I know you can't. I have only let it run out totally once and meant to check the voltage in another device to check when it cuts out. I usually change it when the battery level drops to nothing when I'm firing.
I assume if you are using a high amp battery it will be fine. Mine are 20amp and seem fine when nearly run out. They don't feel hot at all.

oska

Well, I checked voltage on a battery last night when the display was at a quarter and would drop to nothing when firing in the mini. It was at 3.3 Volts. I will definitely be changing them more often and getting some higher Mah Samsungs.

jono987

Thanks oska that's good to know! I saw your post over on potv, I'm going to change mine out when the indicator shows around half or just under just to be safe. I'll run mine down to showing empty tonight   check my voltage

oska

Just checked one that just started to drop to nothing on firing, it was on 3.7V which is about right.