Author: Bill Hicks

E Cigarettes.

[Copy link]

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
26-11-2019 21:02:32 Mobile | Show all posts
For the SD Keyring you can fill your own or buy pre-filled from them

www.ecigscrewdriver.com The Home of an E Smoking Icon - Hosted by CaveCom

These prefilled also work in the Lava Tube as they are both 510 fitting.  They are rated at between 200-300 draws / inhales and cost £20 for 20 of them

I'm using blank Boge 510 cartomisers with my Lava Tube but is annoying the hell outta me having to keep topping them up so I bought one of these...

Puff Diddy Tank

As allows a lot longer between fills and because cartomisers stay wet they last longer
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
26-11-2019 21:02:33 Mobile | Show all posts
I forgot to ask, drip tips, do you really need one? How likely is it that the liquid will actually come up through the cartomiser and into my mouth? I don't intend on drawing particularly hard as apparently this is counter productive? Plus I'm wanting to make some pretty big plumes to help convince some friends to switch
Reply Support Not support

Use magic Report

26-11-2019 21:02:34 Mobile | Show all posts
I quite like the small SDK. Looks like a nice emergency backup.
Does no one else drip?
I like the capacity to have a tank when out but for taste dripping is great when relaxing at home.
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
26-11-2019 21:02:34 Mobile | Show all posts
I only just ordered some supposed to be more comfy. Juice wont come out of cartomiser - well it shouldn't!!
Reply Support Not support

Use magic Report

26-11-2019 21:02:35 Mobile | Show all posts
Will like to hear how you get on with the Daddy. I'm not sure if you will be able to crack the voltage up on that dual core with a lava tube. I believe if the voltage is to high for the atomiser the lava tube reverts to the lowest voltage where the Provari mk1 gives an error code.
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
26-11-2019 21:02:36 Mobile | Show all posts
Supplied is 1.5 ohm dual but I ordered 3 ohm dual coil high voltage replacements

Reviews for it look promising.  Looking to find a tank for standard boge cartomisers for using with SD Keyring any ideas? Or may just use their own pre-filled for work etc etc.
Reply Support Not support

Use magic Report

26-11-2019 21:02:36 Mobile | Show all posts
Being that I'm a tight git lol I would try my eGo C atomisers on the SDK or my tank system that I use on my SD.
I'm not sure I would consider my Mark T on it but it would look nice but that's on my Provari.

The next time I rebuild my coil on the Mark T I'm going to try and achieve a lower resistance to see how it performs.
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
26-11-2019 21:02:37 Mobile | Show all posts
I think for simplicity I'll use pre filled carts on the SD keyring as they are a quid each when bought in bulk.

Hope my tank arrives tomorrow these boges don't seem to hooks much juice at all. Have just put the condom filled one on see how that goes...
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
26-11-2019 21:02:37 Mobile | Show all posts
Just ordered some mega dual coil carts (5ml) for me ego T.

Been reading some good reviews about them
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
26-11-2019 21:02:39 Mobile | Show all posts
For dripping what would I need? Can't afford one if those shockingly expensive re-buildable atomisers.

Can it be done on the cheap?
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | register

Points Rules

返回顶部